Petromat Oils & Gas Equipments

Send Email

Petromat Oils & Gas EquipmentsPetromat Oils & Gas EquipmentsPetromat Oils & Gas Equipments
Home » Welding Accessories




Welding Accessories

To match with the welding and general engineering requirements of various industries, we have designed a quality range of Welding Accessories. These accessories are designed by making use of premium grade materials and advanced techniques in conformation with the quality norms laid down by the industry. The accessories are widely renowned in divergent industries for their exceptional functioning, corrosion resistant, sturdy construction, low maintenance and high durability. Our entire range of welding products is superiorly utilized heavy engineering, pressure vessels, food processing units, petrochemical plants and chemical plants for welding applications.
Welding Accessories

Yes! I am Interested



Aluminum Ferrule

Aluminum Ferrule is specially designed for encircling the weld stud as to give protection to the weld arc, thus, limiting it to a specific area of the base material. We make available these ferrules in both seamless and welded construction as to meet diverse requirements of welding work in industries of petroleum and oil. These types of ferrules are also filled with molten weld metal that further act as a mold to give a uniform shape to the weld flash.

Features:
  • Easy to install with hammer
  • Available in seamless and welded construction
  • Protect the weld arc
  • Give a uniform shape to metal
  • Rust proof finish
  • Protects the molten weld pool from contamination
  • Fixed on to the ends of tubes to be connected
  • Reduces the possibility of open arc flash
  • Concentrates and focus the arc heat to the immediate welding point
  • Limits the molten metal to the weld zone as to form a fillet

Specifications:
  • Size : 1- 32mm
Aluminum Ferrule

Yes! I am Interested



Backing Rings

Backing Rings are specially designed for quick and easy alignment of pipes, preventing leaks. Allowing complete fusion and penetration of the weld, these rings are available in wide range of construction materials including carbon steel, nickel, aluminum and stainless steel. It is just a small piece of ring welded in between the two pipes to secure a joint. These backing rings are perfectly welded in the pipes for a seamless and smooth look.

Features:
  • Available in both round and square shapes
  • Offered in chrome, aluminum or carbon steel construction
  • Prevents the solder from penetrating through the pipes
  • It creates relatively stronger joints than direct soldering
  • Supports and aligns the two pipes for easy welding and correct fitting

Available as:
  • Plain backing rings
  • Machine-welded backing rings
  • Gasket backing rings
  • Grove backing rings
  • Flat backing rings
  • Ridge backing rings
Backing Rings

Yes! I am Interested



Brass Bonnet

The Brass Bonner are used in the piping systems to control the material flow. We offer shutoff or regulating stem tips in straight or angle- pattern valves with extremely adjustable packing. Designed in various shapes and sizes, it’s demanded in the piping systems of petrochemical, oil, gas, chemical industries. We use quality brass while developing the product and make sure it is timely delivered.

Features:
  • Bonnet lock nut
  • Externally adjustable PTFE packing
  • Stem threads isolated from system fluids
  • Leak proof
  • Dimensional accuracy
  • High mechanical strength

Specifications:
  • Sizes : 1/8” to 3”
  • Flange pressure : up to 600PSIG(41.3)
  • Operating temp : -40 to 300oF
Brass Bonnet

Yes! I am Interested



Butt-Weld Branch Connection

Butt- Weld Branch Connection is the most common of all the branch connections available for welding work. Also known as weldolet or WOL, this connection is welded onto the outlet pipe. These are specially designed to meet the schedule of the pipe to be used. This type of branch connection generally reduces the stress concentrations and ensures integral reinforcement.

Features:
  • Ensure integral reinforcement
  • Minimized stress
  • Provide an outlet from a larger pipe to a smaller one
  • Options in sizes, bores and classes
  • Available in different construction materials

Specifications:
  • Available sizes : 42” and larger NPS
  • Outlet sizes : 1/4" -60"
  • Complies with ASME, ASTM, BS and DIN/WERKSTOFFE
  • Type: Seamless, EFW, ERW, DSAW and Forged

Construction materials:
  • Stainless steel- A403 310, 304/L, 321/H, 316/L, 410, 347/H, 440 and 904L
  • Carbon steel- A234 WPB and WPC
  • Alloy steel- A234 WP5, WP1, WP11, WP9, WP22, WP12 and WP91
  • Nickel alloys- 400, 200, K500, 625, 600, 800 and 825
  • Aluminum- 5154, 5083, 5251, 6063, 6061 and 6082
  • Low temperature steel- A420 WPL6 and WPL3
Butt-Weld Branch Connection

Yes! I am Interested



CNG Gas Pipe

CNG Gas Pipe is extensively supplied for use in hydraulic and air systems, low and high pressure oil lines, thermal management systems and fuel lines. All these pipes are stringently subjected to various quality tests of flaring, flattening, salt mist, pressure proof and bending. With excellent tensile strength and optimum flaring ratio, these natural gas pipes are manufactured in wide range of outer and inner diameters. These types of pipes can sustain wide range of work pressure, ensuring leak proof supply of CNG.

Features:
  • Easy to bend
  • Does not corrode
  • Light in weight
  • Resistant to impact
  • Easy to install
  • No requirement for frequent maintenance and service
  • Leak proof
  • Galvanized finish
  • PVF coating for protection

Specifications:
  • Tensile Strength : 290Mpa
  • Flaring Ratio : 20%
  • Yield Strength : 180Mpa
  • Elongation:25%
  • Standards: ASTM A254, SAE J527, YB/T4164
  • Outer diameter: 4- 15 mm
  • Work pressure: 20Mpa- 150MPa
CNG Gas Pipe

Yes! I am Interested



CS Socket

The CS (Carbon steel) Socket is mainly used while welding pipelines for air, steam, gas, oil and many other fluids. Depending upon the requirement, these sockets are available in two different constructions viz. seamless and welded. Manufactured in adherence with the international standards, these carbon steel sockets are also available in different grades. There are many options in our range of CS sockets with different surface finishes.

Features:
  • Options of full and half sockets
  • Offered in different surface finish
  • Wide range of sizes
  • Ensure leak proof supply of fluid and gas throughout the pipe
  • Rust proof finish

Specifications:
  • Standards : ASTM, ANSI, JIS, DIN, ISO, BS, SH, GB and HG
  • Materials : Carbon Steel: ASTM A234 WPB, WPC ASTM A105 WPHY 46, 42, 56, 52, 65, 60, 70 and 80
  • Surface treatment : Black painting, anti-rust varnishes, anti-rust oil, hot galvanized, 3PE coating, epoxy coating
  • Size available:
  • Seamless: 1/2" -24"
  • Welded: 1/2"- 72"
CS Socket

Yes! I am Interested



Cast Iron Plug

The Cast Iron Plug Valve is used for blocking the flow of water completely in the piping systems. These plugs are built by making use of premium grade cast iron and sophisticated techniques. To suffice the piping requirements of industries like petrochemical, oil, gas and chemical; we offer these plugs in different sizes, shapes, thicknesses and specifications.

Product Details :
Materialcast iron
Size1/2 inch , 3 inch, 7.2 inch
StandardsASTM D 3951
Operating temp248 degree F
FinishFine
Applicationpetrochemical, oil, gas and chemical


Features:
  • Capability to withstand higher than line sealant pressure
  • Drop-tight seating
  • Compact sizes
  • Fine finish
  • Sturdy structure
  • Corrosion resistant

Specifications:
  • Size : ½’’ , 3’’, 7.2’’
  • Operating temp : 248oF
  • Standards : ASTM D 3951
Cast Iron Plug

Yes! I am Interested



Collar Clamp

Collar Clamp is specifically designed for limiting the movement of a shaft in many reciprocating applications. Besides, this, these clamps are also applicable as a spacer between the components. Offered in different dimensions to suit wide range of shafts, these types of collar clamps are made in different construction materials like stainless steel, mild steel, aluminum or acetal. Basically, the collar clamp has its prime use to handle those specific applications that require greater axial load capacity.

Features:
  • Limit the movement of shaft
  • Used as a spacer between components
  • Available in different finished
  • Suitable for applications that need high axial load capacity
  • Designed with recessed screw styles
  • Outer surface is free from major projections
  • Manufactured with a keyway for keyed shafts
  • Best for areas that are too constrained for full-sized rigid couplings
  • Thread for secure locking

Specifications:
  • One piece
  • Two-piece
  • Threaded
Collar Clamp

Yes! I am Interested


Home | Company Overview | Infrastructure | Our Products | Why Petromat Oil & Gas Equipment | Media Gallery| Contact Us | Enquiry
Member INDIAMART
Call Us: 08048026637
© Petromat Oil & Gas Equipment Pvt. Ltd.(A Unit Of Bluestar International All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name