Petromat Oils & Gas Equipments

Send Email

Petromat Oils & Gas EquipmentsPetromat Oils & Gas EquipmentsPetromat Oils & Gas Equipments
Home » Elbow Fittings




Flare Fittings

These Flare Fittings are used for connecting to the flared ends of the tubes. Constructed out of different materials in variety of grades, these flare fittings are in strict tandem with the international standard. Suitable for use with brass, copper, aluminum and welded steel hydraulic tubing, these types of fittings are ideal for handling hard-to-hold liquids and gases.

Features:
  • Resist mechanical pullout
  • Options of short nut for minimum vibrations and long nuts for maximum
  • Available with 30°, 37° and 45° of flare
  • Offered with or without O- rings

Specifications:
  • Tube OD : 1/8”- 2”
  • Temperature range : -65° to +250°F
  • Maximum working pressure : 600 bar
  • Construction materials: Carbon steel, stainless steel (30 and 316) and brass (BS-249, IS-319, IS 320, CZ121, C-3604 and CDA-360)
  • Threads: BSP, BSPT, UNEF and NPTF
Flare Fittings

Yes! I am Interested



Galvanized Fittings

Galvanized Fittings are the widely chosen fittings for piping systems and varied pipeline arrangements in the core industries of oil & gas, offshore, petrochemical and petroleum. Ensuring continuous flow of fluid or gas with change in direction, these types of fittings have extra protection layer of thick uniform zinc coating after hot dipped galvanized to avoid rust and corrosion. The accurate threading gives secure and tight joint of the pipe ensuring no leakage of the fluids and gas, avoiding the situation of operational failure and hazard to environment.

Features:
  • Protected with thick coating of zinc
  • Perfectly angled
  • Accurate threading
  • Ensure crack free installation
  • Superior malleability

Specifications:
  • Diameter range : 1/8”- 6”
  • Maximum working pressure : 300 psi
  • Thread ends : ANSI/ASME B1.20.1
  • Thickness: SCH10~SCH160/ STD/ SGP/ XS/ XXS
  • Standard: ASTM / JIS / DIN / BS / GB
Galvanized Fittings

Yes! I am Interested



Nickel Alloy Forged Fittings

Nickel Alloy Fittings are assured to be manufactured from heavy materials and hence suitable for both extreme high and low temperature/ pressure applications. Widely used in the flow lines of gases and fluids in industrial processes, these types of fittings are available in different grades of nickel alloys depending upon the nature of fluid carried and the material used in the construction of piping system.

Features:
  • Highly non- magnetic
  • Stress resistant
  • Welded construction
  • Need minimum space

Specifications:
  • Size : ¼”- 4” NB
  • Weight : 3000- 9000LBS
  • Type : Socket weld and screwed
  • Standard: ASTM / ASME SB 564, ASTM / ASME SB 160 and ASTM / ASME SB 472
  • Grade: Nickel 201 (UNS No N02201), Nickel 200 (UNS No N02200), Monel 500 (UNS No N05500), Monel 400 (UNS No N04400), Inconel 825 (UNS No N08825), Inconel 800 (UNS No N08800), Inconel 625 (UNS No N06625), Inconel 600 (UNS No N06600), Inconel 601 (UNS No N06601), Alloy 20 (UNS No N08020), Hastelloy C 276 (UNS No N10276) and Titanium (Grade I & II)
Nickel Alloy  Forged Fittings

Yes! I am Interested



Ring Fittings

Ring Fittings, comprising of the body, ring and a nut, are the flare-less pipe fittings widely used for connections in fluid applications. Ensuring excellent sealing and holding power required for high operating pressurized supplies, these fittings are basically used as purge and equalization fittings for plugging operations on pipelines. In addition to all these advantages, the entire range of ring fittings is available in different models and diameter sizes for a quick and easy installation in zero clearance areas.

Features:
  • Resistant to vibrations and pressure impulses
  • Easy to dismantle and re-assemble
  • Allows for a quick, easy installation in zero clearance areas
  • Suitable for high pressure to vacuum applications
  • Flare less fittings

Specifications:
  • Size : 1/4”-1”
  • Max working pressure : 14300 psig (980bar)
  • Max temperature : 550° F (280° C)

Types available:
  • SAE straight-thread O-ring fittings
  • Face seal or flat-face O-ring (FFOR) fittings
  • O-ring flange fittings
Ring Fittings

Yes! I am Interested



Screw Fittings

Screw fittings are immensely used for the connections of pipe with small diameters (piping whose nominal diameter is NPS 2 or smaller). Considered as the oldest method of connecting piping systems in the industries, these fittings comply with the standards of ASME B1.20.1.

Features:
  • Suitable for low temperature and low pressure applications
  • Ideal for small bore piping
  • Wide range of sizes available
  • Options in construction materials

Specifications:
  • Steam max, BOP : 10.55kg/cm2
  • Maximum working temperature : 220O C
  • Hydraulic seat : 16kg/cm2 Shell 21kg/cm2
  • Maximum pressure: 7500 psi
  • Construction material: Stainless steel, aluminum, steel, brass, cast gray or malleable iron, forged alloy and carbon steel and cast brass or bronze.
  • Pressure ratings: Class 2000, 3000 and 6000
  • Standard: ASME B1.20.1
  • Size: 1/16”- 12”

Available fittings:
  • Full and half coupling
  • Square and hex head plug
  • Union
  • Cap
  • Tees
  • Crosses
  • Elbows 45 and 90 degrees
Screw Fittings

Yes! I am Interested



Tee Fittings

Tee fittings are the T-shaped fittings designed with two outlets angled at 90° to the connection of the main pipe line. All these types of fittings are used for the connection of pipelines that have pipes at right angle with the line. Available in various materials, sizes and finishes, these tee fittings are widely supplied in the industries of chemical processing, petroleum and oil & gas.

Features:
  • Designed with a curved branch for a clean out plug
  • Used to prevent obstruction of waste
  • Have lugs to fasten the fitting to a wall or stud

Specifications:
  • Size : 1/8”- 4”
  • Applicable standards : ASME B 16.9 (large bore) and ASME B 16.11 (small bore)
  • Surface finish : Galvanized finish, black cast, nickel plated, gold finish, white coating and electroplated

Available as:
  • Equal and unequal tee
  • Reducing tee
  • Male & female branch tee

Material of Construction:
  • Stainless steel
  • Carbon steel
  • Cast iron
  • Nickel
  • Aluminum
  • Copper
  • Brass
  • Bronze
  • Plastic
  • Polypropylene
  • Rubber
Tee Fittings

Yes! I am Interested



Titanium Forged Fittings

A wide range of Titanium Forged Fittings is constructed for use in varied pipeline arrangements for smooth and continuous flow of fluids and gases. Available in socket weld and screwed types, these forged fittings have all the necessary pipe fittings for connecting pipes with different diameters and for changing the direction of the flow for a leak free performance.

Features:
  • High resistance to corrosion
  • Low cycle fatigue properties
  • Suitable for rotating components
  • Low weight
  • Good electrical conductivity
  • Excellent in elasticity
  • Extremely low magnetism
  • Low thermal conductivity

Specifications:
  • Size : 1/2” NB to 4” NB
  • Grade : C70600 (90:10), C71500 (90:10)
  • Type : Socket weld and screwed

Available fittings:
  • Titanium forged elbow
  • Titanium forged cross
  • Titanium forged coupling
  • Titanium forged cap
  • Titanium forged bushing
Titanium Forged Fittings

Yes! I am Interested



Union Fittings

Union Fittings are comprised of a nut, a female and a male end. These types of fittings are specifically designed in such a manner for connecting two pipes that can be easily detached without any deformation to the pipes. Piping connections with small diameters that require easy assembly and disassembly along with positive assembly are connected with the union.

Features:
  • Can disjoint pipes very easily
  • Provide a leak-proof disconnection point in any piping system
  • Can join two pipes of different diameters
  • Suitable for inserting regulating or metering devices into any pipeline system

Specifications:
  • Size : 1/8”- 4” NPS

Construction materials:
  • Nickel alloy
  • Copper alloy
  • Stainless steel
  • Duplex steel
  • Carbon steel
  • Alloy steel

Available as:
  • Flange union
  • Ground joint union
Union Fittings

Yes! I am Interested



Malleable Fittings

Our stock of Malleable Pipe Fittings has the ability to retain the shape in low temperature environment and also resistant to high temperature. All these properties of the fittings make them ideal for both the pipelines supplying hot as well as cold water. There is wide range of malleable pipe fittings designed for ensuring a leak proof and tight connection in the pipeline arrangements. All the fittings are strictly compression and pressure tested.

Features:
  • Rust proof
  • Tested for compression and pressure resistance
  • High temperature resistant
  • Capable of retaining the shape even in low temperature conditions
  • Good for both hot and cold supply

Specifications:
  • Surface finish : Black finish, galvanized and hot dip galvanized
  • Threads : ANSI/ASME standards
  • Shapes : Plain and beaded
  • Diameter: 1/8" to 6" NB
  • Maximum testing pressure: 100 bar

Features:
  • Reducing bushing
  • 90 and 45 degree elbows
  • Crosses
  • Flanges
  • Tees
  • Union
  • Plugs
Malleable Fittings

Yes! I am Interested


Home | Company Overview | Infrastructure | Our Products | Why Petromat Oil & Gas Equipment | Media Gallery| Contact Us | Enquiry
Member INDIAMART
Call Us: 08048026637
© Petromat Oil & Gas Equipment Pvt. Ltd.(A Unit Of Bluestar International All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name